CHANGES TO THE BAILEY PRODUCT RANGE

Bailey G4 - 2010 Rationalisation

Pressure Reducing Valves for   extreme accuracy on steam   Bronze Body, Stainless Steel Trim   Screwed BSP or Flanged Connections   Inlet pressures up to 25Bar   Reduced pressures down to 0.07 Bar   Now available within 4 working weeks

For over 50 years the G4 range has been an integral part of our product range. It has been one of the most respected and successful pressure reducing valves in the international market place. Over this long period of time we have collected many variations in connections and today we have a total of 330 connection variants throughout the range. We will now streamline these and significantly reduce the number available to 143, thus further improving our manufacturing processes.

From 1st January 2010 we will only offer the connections shown in the table below.

AVAILABLE AFTER 1ST JANUARY 2010

FIGURE

MATERIALS

Figure	Size Range (mm)	Connections	Body	Main Valve Trim	DIN Face to Face	Imperial Face to Face
2042	15-50	Screwed - BSP/NPT	Bronze	St Steel	-	-
2042GN	15-50	Screwed - BSP/NPT	Bronze	Nitrile	-	-
2042GV	15-50	Screwed - BSP/NPT	Bronze	Viton	-	-
2042GP	15-50	Screwed - BSP/NPT	Bronze	PTFE	-	-
2043	15-50	Flanged - drilled PN25/40 BS10 H FF Undrilled FF	Bronze	St Steel	Y	N
2043GN	15-50	Flanged - drilled PN25/40 BS10 H FF Undrilled FF	Bronze	Nitrile	Y	N
2043GV	15-50	Flanged - drilled PN25/40 BS10 H FF Undrilled FF	Bronze	Viton	Y	N
2043GP	15-50	Flanged - drilled PN25/40 BS10 H FF Undrilled FF	Bronze	PTFE	Y	N
2044	65-100	Flanged - drilled PN16 RF BS10 F FF ANSI 125 FF Undrilled FF	Carbon Steel	St Steel	-	-
2044	150	Flanged - drilled PN16 RF BS10 F FF ANSI 125 FF Undrilled FF	Carbon Steel	St Steel	-	-
2044	150R	Flanged - drilled PN16 RF BS10 F FF ANSI 125 FF Undrilled FF	Carbon Steel	St Steel	-	-
2044GP	65-100	Flanged - drilled PN16 RF BS10 F FF ANSI 125 FF Undrilled FF	Carbon Steel	PTFE	-	-
2044GP	150	Flanged - drilled PN16 RF BS10 F FF ANSI 125 FF Undrilled FF	Carbon Steel	PTFE	-	-
2044GP	150R	Flanged - drilled PN16 RF BS10 F FF ANSI 125 FF Undrilled FF	Carbon Steel	St Steel	-	-
2045	65-100	Flanged - drilled PN25/40 BS10 H FF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	St Steel	-	-
2045	150	Flanged - drilled PN25/40 BS10 H FF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	St Steel	-	-
2045	150R	Flanged - drilled PN25/40 BS10 H FF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	St Steel	-	-
2045GP	65-100	Flanged - drilled PN25/40 BS10 H FF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	PTFE	-	-
2045GP	150	Flanged - drilled PN25/40 BS10 H FF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	PTFE	-	-
2045GP	150R	Flanged - drilled PN25/40 BS10 H FF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	PTFE	-	-
2046	150R	Flanged - drilled PN25/40 BS10 H FF BS10 K RF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	St Steel	-	-
2046GN	15-50	Flanged - drilled PN25/40 BS10 H FF BS10 K RF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	Nitrile	-	-
2046GV	15-50	Flanged - drilled PN25/40 BS10 H FF BS10 K RF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	Viton	-	-
2046GP	15-50	Flanged - drilled PN25/40 BS10 H FF BS10 K RF ANSI 150 RF ANSI 300 RF Undrilled FF	Carbon Steel	PTFE	-	-

NOT AVAILABLE AFTER 1ST JANUARY 2010

FIGURE

MATERIALS

Figure	Size Range (mm)	Connections	Body	Main Valve Trim
2042SS	15-50	Screwed	St Steel	St Steel
2042SN	15-50	Screwed	St Steel	Nitrile
2042SP	15-50	Screwed	St Steel	PTFE
2043SS	15-50	Flanged	St Steel	St Steel
2043SN	15-50	Flanged	St Steel	Nitrile
2043SP	15-50	Flanged	St Steel	PTFE
2044	65-100	Flanged	Cast Iron	St Steel
2044	125*	Flanged	Cast Iron	St Steel
2044	150	Flanged	Cast Iron	St Steel
2044GP	65-100	Flanged	Cast Iron	PTFE
2044GP	125*	Flanged	Cast Iron	PTFE
2044GP	150	Flanged	Cast Iron	PTFE
2045	125*	Flanged	Carbon Steel	St Steel
2045GP	125*	Flanged	Carbon Steel	PTFE
2046	125-150	Flanged	Carbon Steel	St Steel
2046GP	125-150	Flanged	Carbon Steel	PTFE

* a 150mm body can be offered with a restricted main valve to give a 125mm size flow rate (150R)

---

Class TLP, 716, High Lifts: Cast Iron Products

Following the liquidation of a cast iron casting supplier, we will delete all products from our range that were made of cast iron. Some will be replaced by cast steel versions and others will become obsolete with immediate effect.

AVAILABLE AFTER 1ST JANUARY 2010

Figure	Size Range (mm)	Connections	Materials
716AS	15-50	Screwed in and out	St Steel
716BS	15-50	Screwed in and out	Trim - Aflas Body - St Steel
716ES	15-50	Screwed in and out	Trim - EPDM Body - Bronze
716VS	15-50	Screwed in and out	Trim - Aflas Body - Bronze
716SS	15-50	Screwed in and out	Trim - St Steel Body - Bronze
716AF	15-50	Flanged in, Screwed out	St Steel
716BF	15-50	Flanged in, Screwed out	Trim - Aflas Body - St Steel
716EF	15-50	Flanged in, Screwed out	Trim - EPDM Body - Bronze
716VF	15-50	Flanged in, Screwed out	Trim - Aflas Body - Bronze
716SF	15-50	Flanged in, Screwed out	Trim - St Steel Body - Bronze
683/6	25-100	Flanged - Drilled PN16x6FF ANSI 250x125 FF BS10 FxE Undrilled FF	Cast Steel
683/6	25-100	Flanged - Drilled PN16x6FF ANSI 250x125 FF BS10 FxE Undrilled FF	Cast Steel
723/6	40-100	Flanged - Drilled PN16x6FF ANSI 250x125 FF BS10 FxE Undrilled FF	Cast Steel
766---1	40-100	Flanged - Drilled PN16x6FF ANSI 250x125 FF BS10 FxE Undrilled FF	Cast Steel
693/6	25-100	Flanged - Drilled PN40x16RF ANSI 300x150 RF BS10 HxF RF Undrilled RF	Cast Steel
733/6	40-65	Flanged - Drilled PN40x16RF ANSI 300x150 RF BS10 HxF RF Undrilled RF	Cast Steel
733/6	80-100	Flanged - BS10 HxE Undrilled RF	Cast Steel
766---2	40-65	Flanged - Drilled PN40x16RF ANSI 300x150 RF BS10 HxF RF Undrilled RF	Cast Steel
766---2	80-100	Flanged - BS10 HxE Undrilled RF	Cast Steel

NOT AVAILABLE AFTER 1ST JANUARY 2010

Figure	Size Range (mm)	Connections	Materials
Class TLP	65-150	Flanged - BS4504 PN16 BS10 table 'F'	Cast iron
716CF	15-50	Flanged in and out	Trim - EPDM Body - cast iron
716DF	15-50	Flanged in and out	Trim - Aflas Body - cast iron
716FF	15-50	Flanged in and out	Trim - St Steel Body - cast iron
683/6	25-100	Flanged - drilled PN16x6FF ANSI 250x125 FF BS10 FxE Undrilled FF	Cast iron
723/6	40-100	Flanged - drilled PN16x6FF ANSI 250x125 FF BS10 FxE Undrilled FF	Cast iron
766---1	40-100	Flanged - drilled PN16x6FF ANSI 250x125 FF BS10 FxE Undrilled FF	Cast iron

---

All other product ranges remain unchanged.

If you require any further information please contact your Regional Sales Manager or our sales offices in Manchester UK or Singapore.

---

Safety Systems UK Ltd